Choose Your Language

home

Rapid Mixer Granulator Manufacturer,Planetory Mixer,Mass Mixer,Fluid Bed Dryer

Rapid Mixer Granulator

High Shear Granulator Lab Model

Optional

• Flameproof motor with flameproof operating panel.
• Discharge provided on left or right side ( as per customer requirement.
• Jacketed container for circulation of hot or cold water, with temperature sensing port for product. Jacket made out of SS304 & insulated with SS304.
• PLC based power panel with touch screen based operating panel for process automation.
• A. C. Frequency drive ( VFD ) for both motor variable speed of stirrer & granulator.
• Binder preparation vessel with spray system.
• Container with T/C end joint to collect the material from machine.
• Inspection light lamp facility.

Technical Specifications

Main motor RPM 750 & 1500
Main Stirrer RPM 75 & 150
Granulator motor RPM 1400 & 2800
Granulator RPM 1400 & 2800
Worm Reduction Gear box for speed reduction.  
All required switch gears are of SIEMENS / L&T make.  

 

R&D Model with option of change over of container

Rapid Mixer Granulator

High Shear Mixer Granulator Lab Model

R&D Model

With option of change over of container

Special Features

  • Model available from 02 Liters to 25 Liters gross capacity for R & D Model. The gross capacity & working capacity in liters and working capacity in Kgs. are as below.
Model Gross Capacity in Litres Working Capacity in Litres Working Capacity in Kgs. At Bulk Density of Material 0.50 GMS/ CC Main Stirrer
Motor HP
Granulator Motor HP
RMG - 2 02 01 0.3 to 0.5 0.5 0.5
RMG - 3 03 02 0.6 to 01 1.0 0.5
RMG - 10 10 05 01 to 03 1.0 0.5
RMG - 15 15 10 03 to 05 2.0 1.0
RMG - 25 25 20 06 to 10 3.0 1.0
  • Homogeneous binder distribution.
  • Short batch time and reduce cleaning time.
  • Maximize cleaning effectiveness.
  • Air purge sealing system for main shaft and granulator shaft.
  • All internal contact parts are made out of SS304 / SS316 or SS316 L & polished to the mirror finish.
  • Electrically controlled power & operating panel.
  • A high-speed granulator is inserted horizontally through wall of bowl to assist blending of powder and to break the product to the granules of required size.
  • Inbuilt water flushing system at main stirrer shaft & granulator shaft for cleaning of shaft sealing during change over of product, with facility of built in drain tube   for wash water.
  • Granulator motor is provided with a removable stainless steel shroud, which covers the motor and simplify cleaning.
  • All moving part of the machine are totally enclosed to eliminate accident.
  • The machine can not be started unless and until the mixer cover is properly closed.
  • Flush wall type discharge valve eliminates pockets at the port of discharge valve.

R&D Model

Without option of change over of container

Special Features

  • Pneumatically operated ( non rotating type ) material discharge valve.
  • Castor wheel mounted mobile unit for easy handling.
  • Top cover with facility of light glass, sight glass & filter mounting port.
  • Stainless steel air receiver.
  • 0.3 micron air filter for compressed air.
  • Granulator with U shape ( 02 nos. ) & knife edge blades ( 08 nos.) options.